Shini SGS-6080S, Руководство по эксплуатации

Страница: 70 / 77

70(77)
dismantle screen frame; dismantle pressing block before replace lower
fixed blades.
1) Demount rotate blades
Attention!
Use wood block to plug into blades to avoid shaft autorotation.
1. Take off screws.
2. Take out rotate blades.
3. Clean fitting surface of blades.
Attention!
Single-shaft model adopts sunken diamond-shape blades, which can
switch degrees for using even if one of angels wears.
2) Demount fixed blades
1. Unscrew bolts of upper fixed blades in chamber before demount them.
2. Unscrew adjusting bolts of upper fixed blades.
3. Take off bolts and fixed blades.
Caution!
When unscrew the lasting bolt, make sure press pushing block and
blades to avoid injuries!
4. Unscrew six inner hex sunk bolts of pushing block before demount fixed
blades.
5. Take off pushing block.
6. Unscrew fixed bolts and take off lower fixed blades.
7. Clean fixing plate of lower fixed blades.
3) Install Blades
Carefully clean fixed and rotate blades before installation.
Attention!
Screws and washers need to be replaced along with blades. Firstly install
rotate blade then upper, lower fixed blade. Refer to chapter 3.7 for blades
installation.