Shini SGS-6080S, Руководство по эксплуатации

Страница: 61 / 77

61(77)
4.5 Turn On and Off the Machine
1) Shredder is controlled by main power switch, safety switch, console and
emergency stop.
2) There are two modes of Manual and Auto available.
3) Normal operation adopts Auto mode.
4) Once start-up, check instruction on panel and check if switches are in OFF
position. Then turn on main switch on left side of control cabinet and switch
motor into
“
Running
”
on control panel.
5) Manual mode is to maintain, debug, cleanup and other operations of
separately controlling pushing block and cutter shaft. Under Manual mode,
motor switch controls shaft running and reversely running, turn on oil pump to
control pushing block movements.
Attention!
Under Auto mode, oil pump switch, pushing switch and motor reverse
are unavailable. During operation, keep oil pump and pushing switch in
OFF position to avoid misoperation when switching for Manual mode and
cause personal injury and device damage.
Main power switch:
Main power switch of shredder is installed on control cabinet and turning on/off
the machine is controlled by main power switch. Door interlock switch id
adopted for convenience.
Picture 4-2: Main Power Switch
Shutdown and Turn Power Off