Shini SGS-6080S, Руководство по эксплуатации

Страница: 73 / 77

73(77)
6.3.2 Periodically lubricate bearings
1) Open motor shield.
2) Use lubricate oil gun to fill oil in the bearing.
Picture 6-2: Bearing Oil Filler
6.3.3 Periodical Check or Renew Lubrication oil
1) Open oil discharge valve to drain old oil then close the valve.
2) Open oil filler and place a funnel, fill in with 10L gear lubricate oil VG460.
If shredder not used for a long time, apply oil to tool rest, fixed blade, rotate
blade, crushing chamber and screws.
Picture 6-3: Oil Filling and Drain of Reduction Gear
6.3.4 Regularlly Check the Anti-vibration Device
The anti-vibration pad narrows due to the pinching during operatin and thus lead
to the looseness. Check whether the anti-vibration device is loosened after
20~30 hours operation, if yes, please tighten the screw nut on the device.