Shini SGS-6080S, Руководство по эксплуатации

Страница: 19 / 77

19(77)
2. Structural Features and Working Principle
2.1 General Description
SGS-S series are suitable for crushing plastics including wastes of injection
molding, blow molding or extrusion molding; it is a must to clear away metal
dust and dirt before crushing.
2.1.1 Working Principle
Parts name:
A. Feed hopper B. Material pushing block C. Hydraulic pump station D. Motor
E. V belt F. Reduction gear G. Cutter shaft H. Fixed blade I. Screen
Picture 2-1: Working Principle
Wastes fall into crushing chamber through feed hopper (A). Activated by
hydraulic system, oil cylinder drives pushing block to move wastes close to
cutter shaft (G). Cutter shaft is driven by motor (D) plus reduction gear (F).
Wastes then are granulated by rotate and fixed blade (H), granule size is
controlled by screen (I), which locates in bottom of crushing chamber for easy
replacement. Regrinds falls into storage hopper though screen and conveyed
by V-belts to granulators for further crushing. Feeding methods include
conveyor belt or forklift, etc.
Regrind can be conveyed to granulators via belts or conveyed to store.