Shini SGS-6080S, Руководство по эксплуатации

Страница: 65 / 77

65(77)
5.
Trouble-shooting
5.1 Shredder Fails to Operate
1) Check if emergency stop is reset, if not, switch button to reset as arrow
indicates.
2) Check if motor baffle is fully closed, if not, shredder can not start working.
3) Check storage hopper and screen frame are fully closed, if not, shredder
cannot start working.
4) Check motor overload protector. Tripping happens when motor overload and
trip (A) green rod pushes out. Press
“
Reset
”
button (B) to reset it.
5) Check hydraulic oil pump motor protector. If hydraulic pressure exceeds
10MPA, hydraulic motor will be overload. Motor overload will make shredder
fail to start. Check the motor protector inside control cabinet, protector shuts
down when switch in
“
0
”
position. Adjust it to
“
1
”
position to reset and check if
there is residual, then restart the shredder. Trip (A) green rod pushes out and
press
“
Reset
”
button (B) to reset it.
5.2 Excessive Noise of Reduction Gear
1) Check if lubrication oil is filled to the desired level (as oil pointer indicates).
2) Incorrect installation position of reduction gear. This situation should detected
during first start-up and adjust it to the right position.
3) Too high ambient temperature, take off pump shield to ensure enough space
for pump cooling.