Shini SGS-6080S, Руководство по эксплуатации

Страница: 36 / 77

36(77)
2.3.15.5 Performance and Technical Parameters
1) Rated operating pressure: 7MPa
2) Flow rate: 25/min
3) Motor technical parameters:
Model: 3HP-4P
Power: 2.2kW
Rotation speed: 1450r.p.m.
4) Power parameters of components:
Solenoid directional valve (electro-hydraulic): DC24V
Motor: AC380, 50Hz
5) Recommended transmission medium:
N46, N32 antiwear hydraulic oil
Cleanness for oil tank operation
：
NAS11 class (NAS1638)
Temperature range of system oil: 5
℃
≤
t
≤
50
℃
Oil tank effective volume: 100L
2.3.15.6 Operation and Use of Hydraulic System
1) Inspection before using
Inspect if adjusting handle of elements and auxiliaries is in correct position, if
oil level in liquid indicator range, if pipe joint and fastening screw are lose, if
valve and pipeline leaks.
2) Inspection after startup
Start oil pump and check if system pressure is not higher than 6.5Mpa, if
pushing device speed is suitable. Check at all times motor and oil pump
temperature rising and observe system operating pressure.
3) Maintenance
Replace oil after debugging hydraulic system. Replace hydraulic oil once
after initial using then replace once every year to ensure normal operation.
During operation, inspect if oil filter is blocked and clean or replace filter core.
Spares parts and auxiliaries should be stored for dealing with faults.