manualshive.com logo in svg

Sharp EL-9650, Руководство по эксплуатации, Страница: 57 / 373

Поделиться
Скачать
Sharp EL-9650 Скачать руководство пользователя страница 57

47

UNIQUE FUNCTIONS

For details on the slide show function, see CHAPTER 10 on page 221.

4. SHIFT/CHANGE Function

As with the slide show function, the EL-9650 is installed with a shift function. The shift

function allows the installed equations and graph data to be displayed in order to view

changes in graphs and formulas when shifting. It has a change function to see how

graphs and formulas change after graphs are shifted.

(1) SHIFT function

Shifting is observed using “Y=X

2

”.

1. Press 

Ï

 

.

2. Press 

A

 

>

 

®

.

The “Y=X

2

” graph will appear on the left side of the

screen.

The equation for the currently displayed graph will be
displayed on the upper half of the right side of the screen.
The bottom half of the same side displays the registered
equation.
The cursor “

” will be displayed on the graph. This

indicates the directions in which the graph can be moved,
and that it is in standby mode.

3. Press 

≥

 to shift the graph down.

The cursor “ ” will be displayed, indicating that the

graph will be shifted downwards.

Currently displayed
graph

Registered equation

4. Press 

®

 to confirm.

The equation on the right will be changed with

shifting executed.

“Y=X

2

→

X

2

–1”

The solid lines indicate the graph “Y=X

2

–1”.

Содержание EL-9650






















































































































































































































































































































































































Отзывы:

Нет отзывов