Sharp EL-9650 Скачать руководство пользователя страница 177

Страница: 177 / 373

167

STATISTICS/ REGRESSION CALCULATIONS

for US

•

Data for the Normal Probability Plot:

It is not possible to set the frequency in the Normal Probability Plot (NP.P.) of the

statistical graphs. The statistical data should be created using only one list instead of

splitting the statistical data into the data and frequency.

Normal distribution plot (D N.D.):

• Draws the normal distribution curve of entered

statistical data (x).

• Horizontal axis (x) are data in the range of Xmin to

Xmax.

Box plot (E BOX):

• Shows the entered statistical data (x) using box plot.

• Definitions of points on the graph are as follows:

(A): Smallest value (Xmin) of the statistical data.

(B): Median (Q1) between the median (Med) and the

smallest value (Xmin) of the statistical data.

(C): Shows the median (Med) of the statistical data.

(D): Shows the median (Q3) between the largest value (Xmax) and the median

(Med) of the statistical data.

(E): Shows the largest value (Xmax) of the statistical data.

Modified box plot (F MBOX):

• Shows the entered data (x) using modified box plot.

• Definition of points on the graph are as follows:

(A): Shows the smallest value (Xmin) of the statistical

data.

(B): Shows the tip of the extension and is defined by “(Q3–Q1)

1.5”.

(C): Shows Q1 (same as for box plot).

(D): Shows Med (same as for box plot).

(E): Shows Q3 (same as for box plot).

(F): Shows the tip of the extension and is defined by “(Q3–Q1)

1.5”.

(G): Shows the maximum value (Xmax) of the statistical data.

• The length of the extension from the box is determined by Q1 and Q3.

• Statistical data on the outside of the extension are shown using dots.

• 3 types of dots can be used: “•”, “+” and “ ” .

(A) (B) (C) (D) (E)

(A) (B) (C) (D) (E) (F) (G)

→



→



→

→

→ →

EL-9650-(07)En (157-177)

8/1/00, 9:06 AM

167

Содержание EL-9650






















































































































































































































































































































































































Результаты поиска

Содержание EL-9650

Отзывы:

Sharp EL-9650, Руководство по эксплуатации, Страница: 177 / 373

Результаты поиска

Содержание EL-9650

Отзывы: