Sharp EL-9650 Скачать руководство пользователя страница 248

Страница: 248 / 373

238

CHAPTER 11

←

Generating the graph from the saved equations:

6. Press

≤

. (Touch the upper arrow of “ ” with the

pen.) The graph for “Y = 2X

” is further changed, as

shown to the right.

7. Press

. Sets the moved graph.

In the same manner as described in the SHIFT

function, the previous graph is displayed by the

dotted line and the currently selected graph is

displayed by the solid line.

8. Press

. Stores the equation “Y = 3X

”.

The graph generation screen shown to the right will

appear.

Operations and the screen display are the same as

those described in the SHIFT function.

As described in the SHIFT function, there are the

following two methods to enter the graph generation

screen.

Touch the right portion of the screen with the pen.

Press

Touch with the pen or press

• To return from the graph generation screen to the change screen, touch the left

portion (graph screen) of the screen or press

To return from the CHANGE function to the previous screen:

• Press

to return to the screen which appears immediately after a desired

equation has been selected by pressing

, [B CHANGE], and equation.

• Press

to return to the standard function calculation screen.

• Note that the above key operations clear the moved or saved equations/graphs.

(The built-in equations are not cleared.)

EL-9650-(11)En (229-238)

8/1/00, 9:29 AM

238

Содержание EL-9650






















































































































































































































































































































































































Результаты поиска

Содержание EL-9650

Отзывы:

Sharp EL-9650, Руководство по эксплуатации, Страница: 248 / 373

Результаты поиска

Содержание EL-9650

Отзывы: