Sharp EL-9650 Скачать руководство пользователя страница 43

Страница: 43 / 373

GENERAL INFORMATION

13. Moving the Cursor

(1) Moving the cursor horizontally

(

)

The cursor can be moved along the input line. It is also possible to switch from the

main menu to the sub-menu and vice versa in the menu screen. The cursor moves

one digit at a time for numbers and characters. It is possible to move the cursor

along the graph line in the graph display screen during the tracing.

(2) Moving the cursor vertically

(

≤≥

)

When in the one line input mode, it is possible to move the cursor vertically when

there are two lines or more. In the input screen for as is formulas, it is possible to

move the cursor between arguments of fractions, exponents, and integral functions.

It is also possible to move the cursor vertically in the main menu and sub-menu of

the menu screen.

(3) Jumping

(

≤

≥

)

It is possible to jump to the top line or the end by pressing

before using the

cursor movement keys.

Press

to jump to the front of the numerical formula.

Press

to jump to the end of the numerical formula.

Press

≤

to jump to the top item of the main menu or sub-menu.

Press

≥

to jump to the last item of the main menu or sub-menu.

Press

≤

to jump to the previous page of the sub-menu.

Press

≥

to jump to the next page of the sub-menu.

EL-9650-(01)En (001-036)

8/1/00, 12:04 PM

Содержание EL-9650






















































































































































































































































































































































































Результаты поиска

Содержание EL-9650

Отзывы:

Sharp EL-9650, Руководство по эксплуатации, Страница: 43 / 373

Результаты поиска

Содержание EL-9650

Отзывы: