Sharp EL-9650 Скачать руководство пользователя страница 24

Страница: 24 / 373

CHAPTER 1

6. Using Secondary Functions (2ndF) and

Alphabet Letters (ALPHA)

• The functions and characters printed to the left and right sides above the keys

become active for the next keystroke when

is pressed.

• When

is pressed, the functions printed in yellow become active. When

pressed, the characters printed in blue become active.

• When

is pressed, the shape of the cursor changes to indicate that the

setting has been changed. (See CHAPTER 1 “12.Display Format of the Cursor

Pointer” on page 32 for details.)

(1) Using secondary functions (2ndF)

The secondary functions include function entries, menu screen display, and mode
settings.

<Example>

To obtain the answer “sin

-1

0.5” (Angle mode: Radian)

Press

↑

Secondary function of “sin” key

(2) Entering alphabet letters

<Example>

To enter “A123BCD

”

A 1 2 3

B C D

• Press

to set to the ALPHA LOCK

mode. In this mode, alphabet letters can be entered

continuously from the keyboard.

• To change from the ALPHA LOCK mode to the normal mode, press

(The

cursor changes from “A” to “_”.)

For successful usage, function names, graph equation names (Y1 to Y9 and Y0), list

names (L1 to L6) etc., should not be typed out. Instead, the appropriate key must be

pressed or menu item selected.

<Example>

To input a graph equation named “Y1”, press

. Pressing

will display “Y1” on the screen, but an error will be returned when

executing.

EL-9650-(01)En (001-036)

8/1/00, 12:04 PM

Содержание EL-9650






















































































































































































































































































































































































Результаты поиска

Содержание EL-9650

Отзывы:

Sharp EL-9650, Руководство по эксплуатации, Страница: 24 / 373

Результаты поиска

Содержание EL-9650

Отзывы: