Sharp EL-9650 Скачать руководство пользователя страница 15

Страница: 15 / 373

GETTING STARTED

5. When Using for the First Time

(1) Inserting batteries

1. Open the battery cover located on

the back of the unit.

To remove the battery cover, pull

down on the tab then lift up.

3. Close the battery cover.

Make sure that the tab that was pulled when

opening the cover is inserted completely and a

snapping sound is heard.

The unit is automatically reset when closing the

battery cover. The display “WAIT” will appear

while the unit initializes settings.

Since the cover also functions as a reset switch,

power will not turn on unless the cover is

attached.

2. Insert batteries as shown in the

diagram to the right.

Be careful to insert the batteries in

the correct direction.

Do not remove the label since it

contains backup battery for

memory protection.

EL-9650-(01)En (001-036)

8/1/00, 12:04 PM

Содержание EL-9650






















































































































































































































































































































































































Результаты поиска

Содержание EL-9650

Отзывы:

Sharp EL-9650, Руководство по эксплуатации, Страница: 15 / 373

Результаты поиска

Содержание EL-9650

Отзывы: