Sharp AR-BC260, Руководство по обслуживанию

Страница: 209 / 308

AR-BC260 SIMULATION 9 - 71
This function is enabled only when the AR-MM9 is installed. It is
used when the ICU PWB SRAM data must be backed up in case
of repair of the ICU PWB, etc.
This function is enabled only when the AR-MM9 is installed. It is
used to restore the backup data of the AR-MM9 to the ICU PWB
SRAM after completion of repair of the ICU PWB.
(Printable data)
66 -17
Purpose Operation test/check
Function
(Purpose) Used to select the DTFM signal (1 – 9, 0, *, #) to
send it to the line and the speaker (at the max.
level). (When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select the DTFM signal (1 – 9, 0, *, #) to be sent.
2. Press the [EXECUTE] key.
66 -18
Purpose Operation test/check
Function
(Purpose) Used to select the DTFM signal (1 – 9, 0, *, #) to
send it to the line and the speaker (Level: soft SW
setting). (When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select the DTFM signal (1 – 9, 0, *, #) to be sent.
2. Press the [EXECUTE] key.
66 -19
Purpose Backup
Function
(Purpose) Used to write the ICU PWB SRAM contents (various
set values and user data) into the Flash ROM (AR-
MM9). (When the FAX is installed.)
Section FAX
Item Data
Operation/
Procedure 1. Press the [EXECUTE] key. (YES/NO key
display)
2. Press [Yes] key to write the ICU PWB SRAM
data into the Flash ROM (AR-MM9).
66 -20
Purpose Backup
Function
(Purpose) Used to write the Flash ROM (AR-MM9) contents
(SRAM contents written with SIM 66-19) into the ICU
PWB SRAM. (When the FAX is installed.)
Section FAX
Item Data
Operation/
Procedure 1. Press the [EXECUTE] key. (YES/NO key
display)
2. Press [Yes] key to write the Flash ROM (AR-
MM9) data into the ICU PWB SRAM.
66 -21
Purpose Check
Function
(Purpose) Used to print various registration information,
communication, file management, system error, and
protocol information. (When the FAX is installed.)
Section FAX
Item Data
Operation/
Procedure 1. Select items to be printed.
2. Press the [EXECUTE] key.
REGISTERED Various registration information
MANAGEMENT Communication management
information
FILE MANAGEMENT File management information
SYSTEM ERROR System error information
PROTOCOL Protocol information
66 -22
Purpose Setting
Function
(Purpose) Used to set the sound volume of the handset.
(When the FAX is installed.)
Section FAX
Item Operation
Operation/
Procedure 1. Select the sound volume. (MIN: Minimum,
MIDDLE: Middle, MAX. Maximum)
2. Press the [EXECUTE] key.