AR-BC260 SIMULATION 9 - 58
• When the adjustment value of items A~G is decreased by 1, the
main scanning print position shifts 0.1mm toward the front side.
• When the adjustment value of items A~G is increased by 1, the
main scanning print position shifts 0.1mm toward the rear side.
• To execute item G (ADU adjustment), the ADU must be
installed. In this case, item K (DUPLEX) must be set to 2.
∗
When the set value is increased, the main scan print position is
shifted to the front side by 0.1mm.
(Items to be set)
2. Enter the adjustment value of the selected point with the 10-
key, and press the [OK] key. (The entered adjustment value is
set.)
3. Press the [EXECUTE] key, and the registration adjustment
pattern in the main scanning direction is printed.
(Set items)
∗
When the adjustment value of items A, C, and E is decreased
by 1, the adjustment target color image shifts by one pixel in the
main scanning direction.
∗
When the adjustment value of items B, D, and E is decreased
by 1, the adjustment target color image shifts by one pixel in the
sub scanning direction.
(Display items)
50
-12
Purpose
Adjustment
Function
(Purpose)
Used to adjust the document off-center position.
(Adjusted separately by each document mode.)
Section
Image process (ICU)
Item
Picture quality
Image position
Operation/
Procedure
1. Select a document mode with the scroll key.
2. Enter the adjustment value with the 10-key and
press the [OK] key to set the entered value.
Display
Content
Min.
Value
Max.
Value
Default
A OC
Platen mode
(Document table)
1
99
50
B RSPF
(SIDE1)
Document feeder unit
front surface document
off-center adjustment
1
99
50
C RSPF
(SIDE2)
Document feeder unit
back surface off-center
adjustment
1
99
50
50
-20
Purpose
Adjustment
Function
(Purpose)
Used to adjust the image registration. (Manual
adjustment)
Item
Picture quality
Image position
Operation/
Procedure
1. Select the adjustment mode (DEN-B/DEN-C)
with the scroll key.
Display
Content
Min.
value
Max.
value
Default
A MAIN-
REGIST C
Main scanning direction
registration adjustment (C)
12
88
50
B SUB-
REGIST C
Sub scanning direction
registration adjustment (C)
1
132
50
C MAIN-
REGIST M
Main scanning direction
registration adjustment (M)
12
88
50
D SUB-
REGIST M
Sub scanning direction
registration adjustment (M)
1
132
50
E MAIN-
REGIST Y
Main scanning direction
registration adjustment (Y)
12
88
50
F SUB-
REGIST Y
Sub scanning direction
registration adjustment (Y)
1
132
50
G MULTI
COUNT
Adjustment pattern print
quantity
1
999
1
H PAPER
Paper feed tray selection
(MFT, CS1, CS2, CS3,
CS4, LCC)
1
6
2
(CS1)
I
EXIT
TRAY
Paper exit tray selection
(R, S)
1
2
1 (R)
J DUPLEX
Duplex print selection (NO,
YES)
1
2
1 (NO)
50
-22
Purpose
Adjustment
Function
(Purpose)
Used to adjust the image registration. (Automatic
adjustment)
Item
Picture quality
Operation/
Procedure
Press the [EXECUTE] key. The color registration
adjustment (automatic adjustment) in the main
scanning direction and the sub scanning direction is
performed.
The process of the adjustment is displayed as
follows:
"NOW EXECUTING... S[**********]E"
When the adjustment is completed, the [EXECUTE]
key returns to the normal display.
In case of an error, the cause is displayed.
Display
Content
Min.
Value
Max.
Value
Default
CYAN
MAIN
Main scanning direction
registration adjustment (C)
12
88
50
CYAN SUB Sub scanning direction
registration adjustment (C)
1
132
50
MAGENTA
MAIN
Main scanning direction
registration adjustment (M)
12
88
50
MAGENTA
SUB
Sub scanning direction
registration adjustment (M)
1
132
50
YELLOW
MAIN
Main scanning direction
registration adjustment (Y)
12
88
50
YELLOW
SUB
Sub scanning direction
registration adjustment (Y)
1
132
50
Display
Content
Min.
value
Max.
value
Default
