AR-BC260 SIMULATION 9 - 61
(Items to be set)
• The smaller the set value is, the smaller the deflection quantity
of each specified item is. The greater the set value is, the
greater the deflection quantity is.
∗
Paper size judgment method (Item A to J)
In the cassette tray paper feed, the paper size smaller than
170mm is regarded as the small size.
In the desk tray or ADU paper feed, the paper size of 216mm or
smaller is regarded as the small size.
In the manual paper feed tray paper feed, the paper area of
49128mm² (184 x 267) or less is regarded as the small size.
∗
For the document size judgment of items P and Q in the
document feeder unit, 148mm (A5) or smaller is considered as
the small size.
∗
Adjustment unit of items A to N: Time in the unit of 1ms (The
reference speed is 117mm/s. Variable according to the speed.)
∗
Adjustment unit of items O to Q: Distance in the unit of 0.1mm
51
-02
Purpose
Adjustment
Function
(Purpose)
Used to adjust the contact pressure of paper on the
resist roller of each section (each paper feed and
duplex feed of the copier). (This adjustment is
required when the print image position variations are
considerably great or when paper jams occur
frequently.)
Section
Paper transport (Paper exit, switchback, transport)
Item
Operation
Operation/
Procedure
1. Select the adjustment mode with the scroll key.
2. Enter the set value with the 10-key and press the
[OK] key to set the entered value.
Display
Content
Min.
value
Max.
value
Default
A TRAY (S)
Cassette tray
deflection adjustment
value
1
99
15
B LCC
LCC tray deflection
adjustment value
1
99
10
C ADU (S)
ADU/deflection
adjustment value (small
size)
1
99
30
D MANUAL
PLAIN
PAPER (S)
Manual feed tray/
deflection adjustment
value (Normal paper,
small size)
1
99
50
E MANUAL
HEAVY
PAPER1
Manual feed tray/
deflection adjustment
value (Heavy paper 1)
1
99
50
F MANUAL
HEAVY
PAPER2
Manual feed tray/
deflection adjustment
value (Heavy paper 2)
1
99
50
G MANUAL
OHP1
Manual feed tray/
deflection adjustment
value (OHP1)
1
99
50
H MANUAL
OHP2
Manual feed tray/
deflection adjustment
value (OHP2)
1
99
50
I
MANUAL
ENV
Manual feed tray/
deflection adjustment
value (Envelope)
1
99
50
J
DESK (S)
Desk tray/deflection
adjustment value
(Small size)
1
99
30
K DESK (L)
Desk tray/deflection
adjustment value
(Normal paper, large
size)
1
99
30
L MANUAL
PLAIN
PAPER (L)
Manual feed tray/
deflection adjustment
value (Normal paper,
large size)
1
99
75
M TRAY (L)
Cassette tray deflection
adjustment value
(Large size)
1
99
25
N ADU(L)
ADU deflection
adjustment value
(Large size)
1
99
30
O RSPF
SIDE1
Document feeder unit
front surface document/
deflection quantity
adjustment value
1
99
50
P RSPF
SIDE2 (L)
Document feeder unit
rear surface document/
deflection quantity
adjustment value
(Large size)
1
99
50
Q RSPF
SIDE2 (S)
Document feeder unit
rear surface document/
deflection quantity
adjustment value
(Small size)
1
99
50
52
52
-01
Purpose
Adjustment
Function
(Purpose)
Used to adjust the duplex print mode stacking
capacity (Used to adjust the stop position of the
duplex unit paper tray width alignment plate. The
home position of the width alignment plate is
changed by software.)
Section
Duplex
Item
Operation
Operation/
Procedure
1. Select the adjustment mode with the scroll key.
∗
When the machine is not ready for paper feed,
"NOT READY" is displayed. When the
corresponding tray is unable to feed, "FEED
UNABLE" is displayed. If it is able to feed,
"FEED ABLE" is displayed.
2. Enter the set value with the 10-key and press the
[OK] key to set the entered value.
Display
Content
Min.
value
Max.
value
Default
