SEW-Eurodrive MOVITRAC 07, Системное руководство

Страница: 66 / 170

4
66
System Manual – MOVITRAC® 07
Explanation of the parameters
Parameters
0__ Display values
This group of parameters contains information about
•
Process values
• Statuses
• Fault memory the unit
00_ Process values
000 Speed (signed) [rpm] Resolution 1 rpm.
The displayed speed is the calculated actual speed.
002 Frequency (signed) [Hz] Output frequency of the inverter.
004 Output current (value)
[% I
N
]
Apparent current in the range 0 ... 200 % of the rated unit current.
005 Active current (signed) [% I
N
] Active current in the range 0 ... 200 % of the rated unit current. The dis-
played value is positive when the torque is in the positive sense of rotation;
it is negative when the torque is in the negative sense of rotation.
008 DC link voltage [V] DC link voltage.
009 Output current [A] Apparent current at the inverter output, displayed in A
AC
.
01_ Status displays
010 Inverter status Status of the unit output stage
•
INHIBITED
• ENABLED
011 Operational status The following operational states are possible:
•
CONTROL.INHIBIT
• NO ENABLE
• ENABLE
• FACTORY SETTING
• FAULT
• CURRENT AT STANDSTILL
012 Fault status Fault number and fault in plain text.
014 Heat sink temperature [°C] Heat sink temperature of the inverter.
02_ Analog setpoints
020 Analog input AI1 [V] Voltage 0 ... +10 V at analog input AI1. When S11 = ON and P112 AI1 oper-
ation mode:
•
= NMAX, 0 ... 20 mA: Display 0 ... 5 V = 0 ... 20 mA
• = NMAX, 4 ... 20 mA: Display 1 ... 5 V = 4 ... 20 mA
03_ Binary inputs
031 Binary input DI01 Status of binary input DI01 (CW/STOP = fixed assignment)
032 Binary input DI02 Status of binary input DI02 (CCW/STOP = fixed assignment)
033 Binary input DI03 Status of binary input DI03 (ENABLE/RAP.STOP = factory setting)
034 Binary input DI04 Status of binary input DI04 (n11/n21 = factory setting)
035 Binary input DI05 Status of binary input DI05 (n12/n22 = factory setting)
036 Binary inputs DI01..DI05 Collective display of the binary inputs.
05_ Binary outputs
051 Binary output DO01 Status of binary output DO01 (/FAULT = factory setting)
052 Binary output DO02 Status of binary output DO02 (BRAKE RELEASED = factory setting)
053 Binary outputs DO01, DO02 Collective display of the binary outputs.
No. OP Name Description
P6..
P60.
P600