SEW-Eurodrive MOVITRAC 07, Системное руководство

Страница: 150 / 170

9
150
System Manual – MOVITRAC® 07
Parameter list
Startup
9.9 Parameter list
All parameters which can also be displayed and edited using the symbol on the op-
erating panel have a
•
in the "OP" (operating panel) column. If more than one value can
be selected, the factory setting is highlighted in bold.
Par
No. OP Index
dec.
Name Range / factory setting Value after startup
Display MOVITOOLS
0__ Display values (read only)
00_ Process values
000 Speed (signed) [rpm]
002 Frequency
(signed) [Hz]
004 Output current
(value) [% I
N
]
005 Active current
(signed) [% I
N
]
008 DC link voltage [V]
009 Output current [A]
01_ Status displays
010 Inverter status [Text]
011 Operational sta-
tus [Text]
012 Fault status [Text]
014 Heat sink tem-
perature [°C]
02_ Analog setpoint
020 Analog input AI1 [V]
03_ Binary inputs
031 Binary input DI01 CW/STOP (fixed assignment)
032 Binary input DI02 CCW/STOP (factory setting)
033 Binary input DI03 ENABLE/RAP.STOP (factory setting)
034 Binary input DI04 n11/n21 (factory setting)
035 Binary input DI05 n12/n22 (factory setting)
036 Binary inputs
DI01.. DI05 Binary display
rpm
A
rpm
rpm
rpm
0 0
I