SEW-Eurodrive MOVITRAC 07, Системное руководство

Страница: 147 / 170

System Manual – MOVITRAC® 07
147
9
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
Startup with the integrated operating panel
Startup
General informa-
tion If you are not connecting the motor indicated in the motor selection table: Enter param-
eters P-01 to P-05 correctly according to the nameplate (access via
):
Startup automatically sets the maximum speed P302 to the transition speed.
Activating startup Prerequisites:
• Drive "No enable":
Stop
(Stop)
The complete startup procedure is not complete until you have returned to the main
menu level by pressing the
key.
VFC The default operating mode setting is V/f. You must start up the inverter in VFC or VFC
& DC BRAK. operating mode for:
• High torque
• Continuous duty at low frequencies
• Accurate slip compensation
• More dynamic properties
To do this, during startup you must select the symbol in item
P-01
to choose VFC
or VFC & DC BRAK. operating mode. Then you must perform a motor adjustment using
parameter 320 Automatic adjustment .
No. Name Range / factory setting
P-01 Operating mode 0
3
4
21
22
VFC or VFC & HOIST (can only be set in MOVI-
TOOLS)
VFC & DC BRAK.
VFC & FLYING START
V/f character.
V/f & DC BRAKING
P-02 Rated motor power 0.25
0.37
0.55
... [kW]
Factory setting: Rated motor power in kW corre-
sponding to the rated inverter power
If a smaller or a larger motor is connected (maximum
difference one frame size), then a value must be
selected which is as close as possible to the rated
motor power.
P-03 Rated motor speed 10 ... Rated motor speed ... 5500 [rpm]
P-04 Rated motor frequency 50
60 [Hz]
P-05 Rated motor voltage 50 ... 700 [V]
0 0
I