![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8000-sys/sdc-8000-sys_software-manual_1242852015.webp)
Preparing the conference system for use
15
왘
Insert the software CD into the CD ROM drive of your PC and click the
“setup.exe” icon.
The Wizard starts and guides you through the installation process.
왘
Follow the instructions of the Wizard.
Note:
If you want to install all licensed software modules on a single PC, select
“Complete” under “Setup Type”; if you want to install the program for
controlling the conference system and the program for controlling the
interpretation system on two different PCs, select “Custom” under
“Setup Type” and then select the program to be installed.
If you want to install the software on several slave PCs or video PCs, it
is sufficient to install the “Key Driver” (dongle driver) exclusively on
the master PC.
왘
After you have entered all information requested and started the
installation by clicking “Finish”, the desired software is installed on the
PC.
왘
When the software is installed, the dongle driver (Rainbow
Technologies Sentinel System Driver) is installed automatically. For
this, however, it is vital that
no
dongle is connected to the PC!
Note:
During the installation of the dongle driver, you can select either
“Complete” (all components including the help file) or “Custom”
(optionally without help file). We recommend selecting “Complete”.
After the installation is successfully completed, the newly installed
program group appears under “Start/Programs”. In the
subgroup, you will find the
program for controlling the
conference system; in the
subgroup, you will find the
program for controlling the interpretation system. In addition, you will
find the
utility program for upgrading your license.
Removing the software
To remove the software from the hard disk of a PC:
왘
In the “Control Panel” window, click the “Add/Remove Programs” icon.
The “Add/Remove Programs” dialog box opens.
왘
On the left-hand side of the dialog box, click “Change or Remove
Programs”.
왘
Select “SDC8000” in the list and click the “Change/Remove” button.
A warning appears. Confirm the warning with “Yes”. The software is
removed from the PC.
왘
Select “Sentinel System Driver” in the list and click the “Change/
Remove” button.
A warning appears. Confirm the warning with “Yes”. The dongle driver
is removed from the PC.
Содержание SDC 8000 SYS
Страница 1: ...Software SDC 8000 SYS Software Manual...
Страница 94: ...Accessories 94...