![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8000-sys/sdc-8000-sys_software-manual_1242852057.webp)
Monitoring and controlling a conference
57
Note:
You can also turn the audio inputs and outputs on and off as described
in the following section.
Changing the configuration of the audio inputs and outputs during a
conference
To change the configuration of the audio inputs and outputs during a
conference:
왘
Move the mouse pointer to the left-hand margin of the screen.
The tool palette opens.
왘
In the tool palette, click the “AUX” button.
The “AUX IN/OUT” dialog box opens.
왘
Change the configuration of the audio inputs and outputs as desired.
You configure the same settings as in the “
AUX-In/Out
” menu of the
central unit (see “Configuring the audio inputs and outputs” on
page 94 of the SDC 8000 system manual).
y
Use the volume sliders to set the volume of the audio signal available
at the corresponding audio output.
y
Click the “Off” option button in the “Status” box to turn the
corresponding audio input or output off.
Click the “On” option button to turn the corresponding audio input or
output on.
Note:
You can also turn the audio inputs and outputs on and off as described
in the previous section.
y
From the “Channel” drop down list, choose the number of the
interpretation channel that is to be assigned to the corresponding
audio output. If you choose “0”, the floor channel is assigned.
Содержание SDC 8000 SYS
Страница 1: ...Software SDC 8000 SYS Software Manual...
Страница 94: ...Accessories 94...