![background image](http://html1.mh-extra.com/html/sennheiser/sdc-8000-sys/sdc-8000-sys_software-manual_1242852016.webp)
Starting the program for the first time
16
Starting the program for the first time
When you start the Confsys program for the first time, the necessary
options for your PC or your network are not yet set.
If the dongle is not inserted at startup or if it is removed during operation,
the “Hit CR to abort” dialog box opens.
왘
In the “Hit CR to abort” dialog box, click “OK”.
The “Waiting for master...” dialog box opens.
Note:
If the PC is configured as a video PC or slave PC and does not detect the
dongle at startup (because the master PC is turned off or the dongle is
not inserted into a free USB port of the master PC), the “Waiting for
master...” dialog box also opens.
The “Waiting for master...” dialog box offers you the following options:
1.
You can close the “Waiting for master...” dialog box, insert the dongle
and restart the program (see “Connecting the dongle” on page 16).
2.
You can click the “Options” button (password required!) and configure
the PC as a video PC or slave PC (see “Setting the correct starting
options” on page 16). To do so, you have to enter the TCP/IP address of
the master PC.
You then have to restart the program. The program searches for the
master PC with the inserted dongle. If the dongle is inserted into a free
USB port of the master PC and the master PC is turned on, the program
starts with the selected configuration (video PC or slave PC).
3.
You can start the program in demo mode (see “Starting the program in
demo mode” on page 17).
Connecting the dongle
To close the “Waiting for master...” dialog box:
왘
Click the “Close” button.
The “Waiting for master...” dialog box closes.
왘
Insert the dongle into a free USB port of the master PC.
왘
Restart the program.
Setting the correct starting options
When you start the program for the first time, the “Waiting for master...”
dialog box appears and you have to decide whether the PC is to be
configured as a master PC, slave PC or video PC.
To do so, proceed as follows:
왘
Make sure that all PCs on which you have installed the software are
turned on and that the dongle is inserted into a free USB port of the
master PC.
Содержание SDC 8000 SYS
Страница 1: ...Software SDC 8000 SYS Software Manual...
Страница 94: ...Accessories 94...