Sencore SMD 989 Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 105

background image

SMD 989

– User Manual

Page 2 (105)

Copyright

© 2011 Sencore, Inc. All rights reserved.
3200 Sencore Drive, Sioux Falls, SD USA
www.sencore.com
This  publication  contains  confidential,  proprietary,  and  trade  secret  information.    No  part  of  this  document
may  be  copied,  photocopied,  reproduced,  translated,  or  reduced  to  any  machine-readable  or  electronic
format  without  prior  written  permission  from  Sencore.    Information  in  this  document  is  subject  to  change
without  notice  and  Sencore  Inc.  assumes  no  responsibility  or  liability  for  any  errors  or  inaccuracies.
Sencore, Sencore Inc, and the Sencore logo are trademarks or registered trademarks in the United States
and  other  countries.    All  other  products  or  services  mentioned  in  this  document  are  identified  by  the
trademarks, service marks, or product names as designated by the companies who market those products.
Inquiries should be made directly to those companies.  This document may also have links to third-party web
pages  that  are  beyond  the  control  of  Sencore.    The  presence  of  such  links  does  not  imply  that  Sencore
endorses or recommends the content on those pages.   Sencore acknowledges the use of third-party open
source software and licenses in some Sencore products.  This freely available source code can be obtained
by contacting Sencore Inc.

About Sencore

Sencore  is  an  engineering  leader  in  the  development  of  high-quality  signal  transmission  solutions  for  the
broadcast,  cable,  satellite,  IPTV,  telecommunications,  and  professional  audio/video  markets.    The
company’s world-class portfolio includes video delivery products, system monitoring and analysis solutions,
and test and measurement equipment, all designed to support system interoperability and backed by best-
in-class  customer  support.    Sencore  meets  the  rapidly  changing  needs  of  modern  media  by  ensuring  the
efficient  delivery  of  high-quality  video  from  the  source  to  the  home.  For  more  information,  visit
www.sencore.com.

«
1
2
3
4
...
»

Содержание SMD 989










































































































Отзывы:

Нет отзывов

Похожие инструкции для SMD 989

Бренд: axing Страницы: 40

Бренд: Goobay Страницы: 44

Бренд: Ekselans Страницы: 10

Бренд: LEXIBOOK Страницы: 2

Бренд: Casio Страницы: 31

Бренд: RCA Страницы: 8

Construction Master plus EZ 4067

Бренд: Calculated Industries Страницы: 23

ElectriCalc Pro

Бренд: Calculated Industries Страницы: 66

Бренд: Cisco Страницы: 178

Бренд: Fracarro Страницы: 12

Бренд: Fracarro Страницы: 28

Бренд: Fracarro Страницы: 32

Бренд: Fracarro Страницы: 32

Бренд: Fracarro Страницы: 38

Head Line SIG7280

Бренд: Fracarro Страницы: 40

D-Matrix 4S EVO

Бренд: Fracarro Страницы: 92

Бренд: Ativa Страницы: 2

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды