SMD 989
– User Manual
Page 52 (105)
Output Settings
This section focuses around the IF and optional RF (SMD 920 option) settings found on the right
column of the individual bay home screen.
All SMD 989 modulations will have an IF output area indicating an active or muted output,
frequency range from 57 up to 145 MHz, output level and tilt level. If the SMD 920 L-Band option
is available it will indicate the RF settings for the module as shown in Figure 43.
There are three quick access buttons at the top of the Outputs section. These buttons provide
easy access to common functions or functions that may need to be accessed quickly.
-
Mute: By clicking the mute button the IF/RF outputs will be muted. When the output is
muted the icon will change to “Unmute”
-
Modulating: Clicking the Modulating quick access icon will stop modulated output and
go to a carrier wave (CW). When in CW mode the Modulating icon will change to a
CW image and read “CW Only”
-
RF Level (dBm): This allows the RF output level to be adjusted by either entering the
value, from -30dBm to 5dBm, or by using the up and down arrows.
Figure 43: Outputs section
