SMD 989
– User Manual
Page 60 (105)
Network Configuration
In the middle of the admin tab is the IP address configuration for the physical ports. The
“
Unit
Network Configuration
” shows the management port’s settings. The current status is shown,
but can be modified by clicking on the cog located on the left of the status.
Clicking on the configure cog a dialog box will appear similar to Figure 62. For the modulator
configuration, only IP, subnet, and gateway are allowed to be set. The management port
supports DHCP and static IP addressing.
If set to DHCP the user can enter a hostname to easily access the SMD 989 by the name rather
than the IP address given by DHCP. When the mode is set to static, the user has to set the IP,
subnet, and gateway addresses.
Figure 61: Network configuration
Figure 62: IP settings
