Sencore SMD 989 Скачать руководство пользователя | Manualshive

Страница: 79 / 105

background image

SMD 989

– User Manual

Page 79 (105)

CARRIER ID CONFIGURATION ↕



GLOBAL UNIQUE ID
2E:00:06:4D:FF:FF:00:1F:67
TRANSMISSION: ENBABLED
TRANSMISSION LATITUDE: ENABLED

BAY 1: MODULATOR CONFIGURAT ↕



MODULATION PARAMETERS
MODULATION MODE: S2 MULTI-CCM
BISS CONFIGURATION
PRBS CONFIGURATION
>CARRIER ID CONFIGURATION

BAY 1: PRBS CONFIGURAT ↕



PRBS MODE: PN23 (NORMAL)

BAY 1: MODULATOR CONFIGURAT ↕



MODULATION PARAMETERS
MODULATION MODE: S2 SINGLE-CCM
>BISS CONGIGURATION
PRBS CONFIGURATION
CARRIER ID CONFIGURATION

Modulator Configuration- PRBS Configuration

Configure PRBS

(PRBS Pseudo Random Binary

Sequence) Configuration menu. This menu provides
selection of the available PRBS test signal available for use
with either the SMD910 or SMD912 modulators. The PRBS
feature provides a digital test signal with known properties
used for BERT (bit error rate testing) of satellite equipment
or transmission paths. Test signals used are a binary PN
(Pseudo-Noise) signal known as a PN-23 or Inverted PN-23.

PN23 Normal: A normal version of the Pseudo-

Noise PN-23 test signal

PN 23 Inverted: An inverted version of the Pseudo-

Noise PN-23 test signal

When Enabled, the normal input signal to the modulator is
removed and replaced with the selected PN-23 or Inv PN-23
signal. The PRBS signal is enabled in the Modulation Configuration menu.

Modulator Configuration- Carrier ID Configuration

The Carrier ID Configuration settings permit viewing of the Global Unique ID and permit entry and
enabling of the latitude, longitude, telephone and user
data to the CID information fields. Select the CARRIER ID
CONFIGUATION in the MODULATOR CONFIGURATION
menu.

Global Unique ID

:

A  CID  carrier  may  be  added  to  the  modulaotor
transmission that contains a unique identifier value.   The
Global Unique Identifier is a fixed value for the equipment manufacturer and is not editable by the
user. It may be derived from a 48 bit MAC address or a 48 bit Space Data Association modulator
identifier.

Transmission:

Provides an enable or disable selection

for the CID transmission.

-

Enabled

-

Disabled

Description:

When enabled, a CID transmission is

generated and added to the output. When disable
no CID output including the Global Unique ID and
Information fields are output

Latitude:

Provide entry of a latitude pure decimal value to the CID information field.

-

Enable/

Disabled

«
...
77
78
79
80
81
...
»

Содержание SMD 989










































































































Отзывы:

Нет отзывов

Похожие инструкции для SMD 989

Бренд: Datexx Страницы: 2

Бренд: Televes Страницы: 32

Бренд: Casio Страницы: 110

Financial Consultant FC-100

Бренд: Casio Страницы: 38

Бренд: dbx Страницы: 6

Бренд: HP Страницы: 15

10B - 10B Financial Calculator

Бренд: HP Страницы: 72

Бренд: Sharp Страницы: 31

COMPET QS-2122H

Бренд: Sharp Страницы: 39

Бренд: Televes Страницы: 28

Бренд: Audiovox Страницы: 1

Бренд: Texas Instruments Страницы: 20

$Texas Instruments NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator User Manual preview$

NS/CLM/1L1/B - NSpire Math And Science Handheld Graphing Calculator

Бренд: Texas Instruments Страницы: 144

8-Digit Pocket Calculator

Бренд: NexxTech Страницы: 3

Бренд: NexxTech Страницы: 12

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды