Security
myUTN User Manual Windows
88
• The use of wildcards (*) allows you to define subnetworks.
Test Mode
The 'test mode' allows you to check the configured access protec-
tion. If the test mode is activated, access protection remains active
until the UTN server is rebooted. After restarting, the protection is
no longer effective.
The 'test mode' option is activated by default. After a successful
test, you must deactivate the test mode so that access protection
remains permanently active.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
SECURITY – TCP port access
.
3. Tick
Port access control
.
4. Select the desired protection in the
Security level
area.
5. In the
Exceptions
area, define the network elements which are
excluded from port locking. Enter the IP or MAC addresses and
tick the options.
6. Make sure that the
test mode
is enabled.
7. Click
Save & Restart
to confirm.
The settings are saved.
The port access control is activated until the device is restarted.
8. Check the port access and configurability of the UTN server.
If the UTN server can no longer be reached using the myUTN Control
Center, restart the device; see:
9. Clear
Test mode
.
10. Click
Save & Restart
to confirm.
The settings are saved. The port access control is active. Access to
the ports is restricted.
