Device Settings
myUTN User Manual Windows
53
4.3
How to Configure the Device Time
You can control the device time of the UTN server via a time server
(SNTP server) in the network. A timeserver is a computer networking
device that reads the actual time from a reference clock and distrib-
utes this information to its clients. In the UTN server, the time server
is defined via the IP address or the host name.
UTC
The UTN server uses 'UTC' (Universal Time Coordinated) as a basis.
UTC is a reference time and used as a time standard.
Time Zone
The time received by the time server does not necessarily correspond
to your local time zone. Deviations from your location and the
resulting time difference (including country-specific particularities
such as Daylight Saving Time) can be handled by means of the 'Time
zone' parameter.
Requirements
A time server is integrated into the network.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
DEVICE – Date/Time
an.
3. Tick
Date/Time
.
4. Enter the IP address or the host name of the time server into
the
Time server
box.
(The host name can only be used if a DNS server was configured beforehand.)
5. Select the code for your local time zone from the
Time zone
list.
6. Click
Save
to confirm.
The settings are saved.
4.4
How to Configure the UTN (SSL) Port
A common port will be used for the data transfer between the UTN
server and the client. Depending on the type of connection, two
port variants are available.
UTN Port
Unencrypted connection means that client and UTN server commu-
nicate via the UTN port. The port number 9200 is preset.
