Network Settings
myUTN User Manual Windows
48
access point and the UTN server do not match. It is therefore recom-
mended to use hexadecimal WEP keys.
WPA/WPA2
In contrast to WEP, WPA (Wi-Fi Protected Access) offers enhanced
mechanisms for exchanging keys. The exchange key is only used at
the beginning of a session. Afterwards a session key is used. The key
is regenerated periodically. The WPA mechanism requires an authen-
tication at the beginning of a connection.
In the 'Personal Mode' authentication is done via the Pre Shared Key
(PSK). The PSK is a password with 8–63 alphanumerical characters.
The 'Enterprise Mode' uses the EAP authentication method.
An individual 128 bit key is used for data encryption after the
authentication. The encryption methods TKIP (Temporal Key Integ-
rity Protocol) and AES (Advanced Encryption Standard) are available
for the encryption of data.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
NETWORK – WLAN
.
3. Configure the WLAN parameters; see: table 9
.
4. Click
Save & Restart
to confirm.
The settings are saved.
If the UTN server changes the network, it may receive a new IP
address. If this is the case, the connection to the myUTN Control
Center is interrupted.
