Working with the SEH UTN Manager
myUTN User Manual Windows
65
5.2
How to Add UTN Servers/USB Devices to the
Selection List
The UTN servers found during the network scan will be displayed in
the 'network list'. To use the connected USB devices, they must be
assigned to the 'selection list' in the SEH UTN Manager together
with the UTN server.
Requirements
The SEH UTN Manager (complete version) is installed on the
client; see:
The UTN server was recognized during the network scan and is
displayed in the network list.
Proceed as follows:
1. Start the SEH UTN Manager.
2. Select
Selection List – Edit
from the menu bar.
The
Edit Selection List
dialog appears.
3. Select the UTN server to be used from the network list.
4. Click
Add
.
(Repeat steps 2 and 3, if necessary.)
5. Click
OK
.
The UTN servers and the connected USB devices are displayed in
the selection list.
Fig. 10: SEH UTN Manager - Edit Selection List
To directly add a UTN server with a known IP address to the selection
list, select
UTN Server – Add
from the menu bar.
