Network Settings
myUTN User Manual Windows
44
3.6
How to Configure POP3 and SMTP (only
myUTN-80 and later)
You must configure the protocols POP3 and SMTP on the UTN server
so that the notification service (
55) and the remote mainte-
nance via email (
POP3
'POP3' (Post Office Protocol Version 3) is a transfer protocol that a
client can use to fetch emails from a mail server. POP3 is required in
the UTN server to administer the UTN server via email.
SMTP
'SMTP' (Simple Mail Transfer Protocol) is a protocol that controls the
sending of emails in networks. SMTP is required in the UTN server to
administer the UTN server via email and to run the notification ser-
vice.
What Do You Want
To Do?
Configuring POP3
Requirements
The UTN server is set up as user with its own email address on a
POP3 server.
Proceed as follows:
1. Start the myUTN Control Center.
2. Select
NETWORK – Email
.
3. Configure the POP3 parameters; see: table 7
.
4. Click
Save
to confirm.
The settings are saved.
