Rostock MAX v2 Assembly Guide – 4thEd.
2 – Visual Bill of Materials
The Rostock MAX v2 kit shipping box should contain the following items:
•
Four Melamine laser cut part sheets. (3 full, 1 partial) [84301]
•
1 Smoked Acrylic Parts Package [84302]
•
1 310mm x 3mm Borosilicate Glass Build Plate [26602]
•
3 T-Slot Rail, 1” (25mm) square x 32” (812mm) long aluminum [68310]
•
1 Power Supply 12VDC, 30A Model LIHUA-360W [26733]
•
1 Rostock MAX v2 Electronics and Hardware Pack, Rev3.
If you're planning on painting your Rostock MAX v2, especially the part edges, you would be
well served to carefully trace the outline of each part with a razor knife in order to cut the supporting
masking tape. This way you can retain the protective mask on the parts in order to make painting the
edges easier. Otherwise you'll have to re-apply a mask to avoid getting paint on the Melamine surfaces
of the parts.
2 – Visual Bill of Materials – 9
Shipping box contents.
