Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
1.1.3
Overview of fitting locations – engine, exhaust side
1 - Oil level/oil temperature
sender - G266-
❑ Removing and installing
2 - Coolant temperature send‐
er - G62-
❑ Removing and installing
1.2
Reducing fuel pressure in high-pressure
section
CAUTION
The fuel system is under high pressure.
Risk of injury due to fuel which may spurt out.
– Release high pressure.
Special tools and workshop equipment required
♦ Vehicle diagnosis and service information system
Reducing fuel pressure in high-pressure section:
– Connect vehicle diagnosis tester and then carry out the func‐
tion “Reducing high fuel pressure” in “Guided functions”.
• Fuel pressure will drop to a specified value.
– Switch off ignition.
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
208
Rep. gr.24 - Mixture preparation - injection