Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
– Remove bolts -arrows- and detach engine mounting -1-.
Note
♦
Danger of damage to vacuum lines or electrical wiring and to
engine compartment.
♦
Check that all vacuum lines and electrical wiring between en‐
gine, gearbox, subframe and body have been detached.
♦
Carefully guide out engine/gearbox assembly with subframe
from engine compartment when raising.
♦
Make sure that air conditioner compressor and refrigerant
pipes and hoses are not damaged.
♦
Do not stretch, kink or bend refrigerant pipes and hoses.
♦
Carefully lift the »engine/gearbox unit« upwards when remov‐
ing it, in order not to damage the bodywork and the coolant
hoses.
♦
Secure engine to engine and gearbox support - VAS 6095- to
carry out repairs
1.2
Separating engine and gearbox
Special tools and workshop equipment required
♦ Hook - 10 - 222 A /2-
♦ Shackle - 10 - 222 A /12-
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
18
Rep. gr.10 - Removing and installing engine
