Protected by copyright. Copying for private or commercial purposes, in part or in whole, is not
permitted unless authorised by SEAT S.A. SEAT S.A does not guarantee or accept any liability with
respect to the correctness of information in this document. Copyright by SEAT S.A.
Securing threaded connection for oil filter
• If threaded connection -2- from top section of sump -1- has
loosened, secure it as described below.
Only carry out procedure with both nuts -3 and 4-
• 2 x hex nuts - 068 115 723- ⇒ Electronic parts catalogue
– Screw nuts -3- and -4- onto threaded connection -2- and coun‐
terlock them.
– Tighten threaded connection -2- by tightening nut -3-.
– Loosen and unscrew both nuts, taking care not to loosen
threaded connection.
Specified torques
Threaded connection
Tightening torque
-2-
50 Nm
1.2
Engine oil
Oil capacities
⇒ Maintenance ; Booklet 501
Engine oil specifications
⇒ Maintenance ; Booklet 501
Changing the engine oil: ⇒ Maintenance ; Booklet 501 “Engine
oil: drain”.
Note
♦
After adding oil, always check correct oil level on oil dipstick.
♦
The oil level must not be above the max. mark - danger of
damaging catalytic converter. Marks
1.3
Removing and installing sump
Special tools and workshop equipment required
♦ Oil filter tool - 3417-
León 2013 ➤ , León ST 2013 ➤
4-cylinder petrol engine (1.2 l direct injection, 4 V, turbocharger, EA211) - Edition 02.2017
130
Rep. gr.17 - Lubrication
