SciCan STATIM 2000S Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 59

SciCan STATIM 2000S Скачать руководство пользователя страница 2

Manufactured by:

SciCan

1440 Don Mills Road,
Toronto ON M3B 3P9
CANADA
Phone:

(416) 445-1600

Fax:

(416) 445-2727

Toll free: 1-800-667-7733

EU Representative:
BHT Hygienetechnik GmbH

Messerschmittstr. 11
D-86368 Gersthofen
GERMANY

For all service and repair inquiries:

Canada: 1-800-870-7777
United States: 1-800-572-1211
International: (416) 446-4500
Email: [email protected]

My.SciCan is the private access information network for SciCan employees,

SciCan technicians and associated dealers. My.SciCan.com is the one-stop

information outlet for all your technical service and overall SciCan product needs.

On the site you will find technical and operator manuals, technical bulletins,

product artwork, and brochures. As a registered user, you will receive frequent

product updates to make sure you have all the latest news and information from

SciCan.

Join by registering at: http://my.scican.com/

Table Of Contents

1. Statim non-S Rev 6xx Calibration Instruction . . . . . . . . . . . . . . . . . . . . . 1
2. Statim S-Class Rev 6xx Calibration Instruction. . . . . . . . . . . . . . . . . . . . 4
3. Statim USB Adapter Quick Setup Guide. . . . . . . . . . . . . . . . . . . . . . . . . . 8
4. PCB Rev. 7.0 Assembly Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
5. PCB 7 Kits ST5000 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
6. PCB 7 Kits ST2000 Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
7. Conductivity Calibration . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. Statim Rev. 7 PCB User and Service Setup . . . . . . . . . . . . . . . . . . . . . . 15
9. 2000 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
10. 5000 Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
11. S-Class Troubleshooting Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
12. SciCan Data Logger troubleshooting. . . . . . . . . . . . . . . . . . . . . . . . . . 55
13. Printer Interface Board Rev. 4.X Installation Instructions. . . . . . . . . . 57

STAT

IM

Cassette Autoclave is a registered trademark of SciCan Ltd.

STAT-DRI is a trademark of SciCan Ltd. All other trademarks referred to in this manual

are the property of their respective owners.

SciCan Medtech

Alpenstrasse 16,
6300 Zug
SWITZERLAND
Phone: (41-41) 727-7027
Fax: (41-41) 727-70-29

SciCan Inc.

500 Business Center Drive
Pittsburgh, PA 15205
USA
Phone:   (412) 494-0181
Fax:            (412) 494-4794
Toll free:  1-800-572-1211

«
1
2
3
4
...
»

Содержание STATIM 2000S




























































Отзывы:

Нет отзывов