SATO CW408, Руководство оператора, Страница: 97 / 120

Section 6: Basic Specifications
CW408 Operator Manual Page 6-7
6.2 OPTIONAL ACCESSORIES SPECIFICATIONS
CUTTER SPECIFICATIONS
Media Type
Label, tag
1) Avoid to cut on the label area (glued area)
2) Perforation and leading part of media are forbidden areas for cutting. Cut rear
area of perforation.
Media Size
Width: 25 to 115 mm (1.0” to 4.5“)
Width including liner: 28 to 118 mm (1.1” to 4.6”)
Pitch: 25 to 397 mm (1.0” to 15.6”)
Pitch including liner: 28 to 400 mm (1.1” to 15.7”)
Thickness 0.08 to 0.12 mm (0.003” to 0.005”)
Dimensions
W 178 X D134 X H 146 mm (with printer)
(W 7.0” X D 5.3” X H 5.7”)
Weight 1.8 kg (3.96 lbs) (with printer)
Durability 300 thousand times
Cut Position Adjustment
Adjustment is available with the cut position in Adjustment mode by using OLED and
buttons on the operator panel.
Mechanism Guillotine cutter
Self Diagnosis Function Cutter malfunction detection
DISPENSER SPECIFICATIONS
Media Type
Label only
1) Availability and operating condition are constrained depending on the media type,
glue type and label size.
2) Peel-end treatment is fundamental for the dispenser. Media that has no peel-end
treatment should be evaluated in each case.
3) You cannot use liner with perforation and/or slit for dispenser.
4) You can use strong glue type and weak glue type but not the type in between for
dispenser.
Media Size
Width: 25 to 115 mm (1.0” to 4.5“)
Width including liner: 28 to 118 mm (1.1” to 4.6”)
Pitch: 25 to 100 mm (1.0” to 3.9”)
Pitch including liner: 28 to 103 mm (1.1” to 4.1”)
Thickness 0.08 to 0.21 mm (0.003” to 0.008”)
Dimensions
W 178 X D 122 X H 146 mm (with printer)
(W 7.0” X D 4.8” X H 5.7”)
Weight 1.6 kg (3.5 lbs)
Durability Unit: 150 km, Nip roller: 30 km
Detection Sensor Dispenser sensor (Transmissive type)
Dispensed Position Adjustment
Adjustment is available with the offset position in Adjustment mode by using OLED
and buttons on the operator panel.
Preliminary