SATO CW408, Руководство оператора, Страница: 79 / 120

Section 4: Cleaning and Maintenance
CW408 Operator Manual Page 4-5
4.4 EASY REPLACEMENT OF PARTS (cont’d)
7.
Insert the shaft of the new print head assembly into
the hole on the left side of top cover .
8.
Press on both sides of the print head assembly and
slide upwards to lock the print head assembly in
place.
Make sure that the latch on the side of the print head
assembly is locked.
9.
Close the top cover .
10.
Restore power, reload media, reset the head counter and
perform a test print to make sure that the
print head is
connected properly.
4.4.2 How to Replace the Platen Roller
1.
Make sure that the printer is set to off, and remove the AC
power cord.
2.
Lift the top cover .
3.
Locate the dispenser bar in front of the platen roller
, and flip the dispenser bar in the direction as
shown.
4.
Lift the dispenser bar to remove the defective platen
roller assembly and replace it with a new one.
5.
Follow the above steps, in reverse sequence, to
reassemble the new
platen roller . Make sure that the
dispenser bar snaps back in position.
Perform a media feed to make sure that the platen roller is
assembled correctly.
5
6
6
7
7
8
4 5
6
7
2
8
1
2
3
1
2 3
4
4
Preliminary