SATO CW408, Руководство оператора, Страница: 86 / 120

Section 5: Troubleshooting
Page 5-6 CW408 Operator Manual
5.1 ERROR SIGNAL TROUBLESHOOTING (Cont’d)
5.1.4 Warning Messages
Note that the printer will continue issuing media while detecting a warning message.
No. WARNING DISPLAY LED/ BUZZER ERROR CONDITION CORRECTIVE ACTION
01 BUFFER NEAR FULL ONLINE: On
ERROR: Blinks
No beep sound
1) Available space for receive
buffer is low.
1) Do not send the data from the
host until the analysis of
received data is completed.
02 COMMAND ERROR ONLINE: On
ERROR: Off
1 short beep
1) Command error was
detected.
2) Print ratio per media
exceeded 50% (416 dots)
when using print darkness
level B.
• This screen appears only
when DISPLAY ERROR is
set to DISABLE in
Advance settings mode.
To clear error: The Icon will
be cleared when receiving
next item or cancelling the
job.
1) Confirm print data.
2) Adjust print layout so that print
ratio is lower than 50%.
03 HEAD ERROR ONLINE: On
ERROR: Off
No beep sound
1) Detected print head dam-
age with “STANDARD”
HEAD CHECK and contin-
ued printing operation
using “BARCODE” HEAD
CHECK.
To clear error: Power off
(Print head replacement)
1) Replace print head.
04 PRINT PAUSE ONLINE: Blinks
ERROR: Off
No beep sound
1) Print ratio per one media
exceeded certain level.
1) Wait for a while.
ONLINE
000000
ONLINE
000000
ONLINE
000000
PAUSE
Preliminary