SATO CW408, Руководство оператора, Страница: 103 / 120

Section 7: Interface Specifications
CW408 Operator Manual Page 7-5
7.3 LOCAL AREA NETWORK (LAN) ETHERNET (Cont’d)
7.3.2 Software Specifications
Protocol TCP/IP
Network layer ARP, RARP, IP, ICMP
Session layer TCP, UDP
Application layer LPD, FTP, TELNET, BOOTP, DHCP
Notes
• LPR, FTP and dedicated socket protocol of TCP/IP are available for sending print data.
• Dedicated socket protocol is available to obtain printer status.
7.3.3 TCP/IP Specifications
In TCP/IP protocol environment, LPD and FTP are provided for printing. TELNET is provided for the setup of
each variable. RARP and BOOTP/DHCP are available for the setup of each IP address.
In Windows XP, Windows Vista, Windows 7, Windows Server 2003, Windows Server 2008,and Windows
Server 2008 R2 environments, IP address and each variable can be set using the printer setting tool, such as
SATO All-In-One application.
In socket connection, monitor the transmission of print data and the printer status by using [Printer Driver] and
[Status Monitor]. Note that multiple sessions cannot be established at the same time. For more information
about [Printer Driver] and [Status Monitor], refer to your SATO reseller or technical support center.
7.3.4 LPD Specifications
LPD protocol complies with RFC1179 and handles the list of logical printer names as queue name such as lp,
sjis and euc.
When sending a job by LPR, the transmission order of data file/control file within the job does not affect the
printing operation.
Notes
• A job deletion by LPR is not supported.
• Only Status 4 is available for LPD specification.
• When conducting large quantity printing with LPR, some data may be skipped because of the specification
of Windows.
• Banner page print is not supported.
7.3.5 FTP Specifications
FTP protocol complies with RFC959 and handles the list of logical printer names as a transfer directory. File
transfer to this directory executes print operation. Note that it is possible to specify ASCII(A), BINARY(I), and
TENEX(L8) as transfer modes, however difference of the mode depends on the client.
In addition, a banner page can be printed with a proper setup.
There are three directory names such as lp, sjis and euc.
Queue Name Kanji Filter Applied Input Kanji Code
lp Not available N/A
sjis Not available N/A
euc Not available N/A
Queue Name Kanji Filter Applied Input Kanji Code
lp Not available N/A
sjis Not available N/A
euc Not available N/A
Preliminary