SATO CW408, Руководство оператора, Страница: 42 / 120

Section 3: Operation and Configuration
Page 3-16 CW408 Operator Manual
3.9 OPERATION SETTINGS MODE
The following settings are available in the Operation settings mode.
1. In BASIC SETTINGS menu, press the LINE button repeatedly to display OP SETTINGS on the screen.
Press the FEED button to confirm the selection.
2. The OP SETTINGS menu is displayed. Press the FEED button to switch to the next setting options as
shown above. To return to the previous setting option, press the LINE and FEED buttons simultaneously.
To return to the BASIC SETTINGS screen, press and hold the LINE and FEED buttons simultaneously for
more than three seconds.
OP SETTINGS
BACKFEED MOTION
AFTER
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
LINE + FEED button
for more than 3 secs
BASIC SETTINGS
OP SETTINGS
SELECT SKIP
LINE + FEED button
OP SETTINGS
BRIGHTNESS TIMER
MIN 00
LINE + FEED button
LINE + FEED button
for more than 3 secs
FEED
button
FEED button
FEED button
LINE + FEED button
FEED button
LINE + FEED button
OP SETTINGS
MEDIA TYPE
ROLL
OP SETTINGS
MEDIA TYPE
FAN-FOLD
FEED button
OP SETTINGS
SENSOR TYPE
NONE
LINE + FEED button
OP SETTINGS
SENSOR TYPE
I-MARK
OP SETTINGS
SENSOR TYPE
GAP
FEED button
LINE + FEED button
for more than 3 secs
When you installed the
cutter or dispenser, the
screen displays CUTTER
or DISPENSER respec-
tively.
These screens display only
when you have selected
CUTTER or DISPENSER
in OPERATION MODE.
NONE screen does not
display in DISPENSER
mode.
These screens do not
display when you have
selected DISPENSER in
OPERATION MODE.
NONE screen does not
display when you have
selected TEAR OFF or
DISPENSER in
OPERATION MODE.
OP SETTINGS
OPERATION MODE
CONTINUOUS
OP SETTINGS
OPERATION MODE
DISPENSER
OP SETTINGS
OPERATION MODE
CUTTER
OP SETTINGS
OPERATION MODE
TEAR OFF
* Press the LINE button to set the value or select an item.
* Press the FEED button to shift the cursor to the next digit or to
save the setting and move to the next screen.
* Press and hold the LINE and FEED buttons simultaneously for
more than three seconds to revert to the BASIC SETTINGS
menu.
OP SETTINGS
BACKFEED MOTION
NONE
OP SETTINGS
BACKFEED MOTION
BEFORE
Preliminary