SATO CW408, Руководство оператора, Страница: 104 / 120

Section 7: Interface Specifications
Page 7-6 CW408 Operator Manual
7.3 LOCAL AREA NETWORK (LAN) ETHERNET (Cont’d)
7.3.6 TELNET Specifications
TELNET complies with RFC854. This consists of an interactive menu form, and it enables you to change the
internal setup, refer to it and to display the status. To change the setting details, enter 'root' user name and
password at the time of login. Default value of root password is set to null (line feed only).
<Example of TELNET command>
In MS-DOS command prompt, type in [ TELNET xxx.xxx.xxx.xxx (IP address) ] and enter user name and
password to advance to the display below.
1) Printer name is entered in [ModelName].
2) For the detailed settings of [1:Setup TCP/IP], refer to
Section 7.3.7 Setting/Displayed Items .
7.3.7 Setting/Displayed Items
The following table shows the settings and referable sections as well as various variables.
TCP/IP related setting
*
1
Number in [ ] is the limit number of characters.
Variable Identifier Setting Range Default (Factory Setting)
IP address 0.0.0.0 ~ 255.255.255.255 192.168.1.1
Subnet mask 0.0.0.0 ~ 255.255.255.255 255.255.255.0(Calculated from IP
address)
Gateway address 0.0.0.0 ~ 255.255.255.255 0.0.0.0
RARP protocol ENABLE/ DISABLE DISABLE
DHCP protocol ENABLE/ DISABLE DISABLE
Keepalive time 30~300 180 (Sec)
Keepalive retry 1~99 17 (Times)
Socket cancel Normal/Compatible Normal
ROOT password
Any alphanumeric characters[16]*
1 NULL (No password)
SATO PRINTER [ModelName] TELNET server.
Copyright 2011(C) SATO Corporation.
login: root
'root' user needs password to login.
password:
User 'root' logged in
No. Item Value (level.1)
----------------------------------------------------------
1 : Setup TCP/IP
2 : Display status
99 : Exit setup
Please select(1-99)?
Preliminary