SATO CW408, Руководство оператора, Страница: 117 / 120

Section 8: Appendix
CW408 Operator Manual Page 8-11
8.6 AUTOMATIC MEDIA FEED (Cont’d)
Notes (cont’d):
• If you place the media 150 mm (5.9”) ahead of the print head, an error will occur when closing the cover.
• When the automatic media feed function is enabled in tear-off or cutter mode, the position of the first media
is not set correctly. Press the
FEED button in offline mode to adjust the position.
8.6.2 Automatic Media Feed (Disable)
When automatic media feed setting is disabled, the printer does not feed media automatically. Open the cover
of the printer to set the media manually.
8.6.3 Notes for Automatic Media Feed
1. When setting the media with the cover open or when rebooting the printer, you have to set the first piece of
the media. When setting the first media, make sure that the I-mark or gap of label does not overlap the
paper sensor or I-mark sensor. (Sensor detection error or paper jam may occur when setting the media
other than the first.)
2. When setting the media for the automatic media feed, make sure that the paper sensor can detect the
media correctly. (For example, cut the perforated line of the media)
3. Make sure to set the new media as the printer is ready for printing after automatic media feed is com-
pleted. If you set a printed media, the printing overlaps the printed area of the media.
Preliminary