SATO CW408, Руководство оператора, Страница: 59 / 120

Section 3: Operation and Configuration
CW408 Operator Manual Page 3-33
3.14 TEST PRINT MODE (Cont’d)
2) Second piece --
When a large print size is selected due to test print layout, the following information will be printed out.
Printed Item Name Item Name Description
Print Speed Print speed 2 ~ 6 (inch/s)
Print Darkness Print darkness 1 (Lightest) ~ 10 (Darkest) A
Print Offset V Vertical print offset position ±xxxx(dot)
Print Offset H Horizontal print offset position ±xxxx(dot)
Label Size Label size (Pitch/Width) (P)xxxx X (W)xxx (dot)
Zero Slash Zero slash setting Zero with a slash through it: Enable
Zero without a slash: Disable
Codepage Character code setting 858
Kanji Font Kanji font GB18030
Character Pitch Character pitch Printing by proportional pitch: Proportional
Printing by fixed pitch: Fixed
Operation Mode Operation mode settings Continuous/ Tear Off/ Cutter/ Dispenser
Backfeed Action Backfeed action After: Action 1
Before: Action 2
No backfeed motion: None
Print Method Print method Direct Thermal
Sensor Type Sensor type I-mark sensor: Reflective Sensor
Gap sensor: Transmissive Sensor
Sensor disabled: None
OLED Sleep Time OLED sleep time 00 ~15 (min)
OLED Brightness OLED brightness 01 (dark) ~ 03 (bright)
OLED Language OLED language ENGLISH/ CHINESE
Head Check Head check setting When head check is disabled: None
When head check is enabled:
Checking actual print area: Normal
Checking barcode print area: Barcode
Head Check Mode Head check mode 1Item/ Page(xxxxxx)/ Start-End/ None
Auto Online Auto online Enable/ Disable
Initial Feed Initial feed Enable/ Disable
Online Feed Online feed Enable/ Disable
Priority Setting Priority setting Command/ Internal
Command Error Command error Enable/ Disable
Paper End Search Paper end search ROLL/ FANFOLD
Buzzer Buzzer Enable/ Disable
Option waiting time Option waiting time 1000 (ms)
Ignore CR/LF Ignore CR/LF Enable/ Disable
Ignore CAN/DLE Ignore CAN/DLE Enable/ Disable
Protocol Code Protocol code setting Standard code: Standard
Non-standard code: Non-standard
Also, the protocol code set for the printer will be
printed out.
STX:xxH, ETX:xxH, ESC:xxH, ENQ:xxH,
CAN:xxH, NULL:xxH, OFFLINE:xxH, EURO:xxH
Preliminary