Additional Functions
A number of additional menu codes enable you to assign or deny access to various
functions.
Menu Access Function on Standard Balances
You can define the function of the menu access switch on standard balances
by setting the code for the balance operating menu to “accessible.”
Access to the balance operating menu with standard balances
Code
Accessible
8 1 1
Depends on the setting of the menu access switch
* 8 1 2
Menu Access Switch Function on Verified Balances of Accuracy Class
K
The balance operating menu can also be changed when the balance is being
used as a legal measuring instrument. Codes that are not permitted for operation
of the balance as a legal measuring instrument are blocked and cannot be
selected. The balance operating menu on verified balances approved for use as
legal measuring instruments
cannot
be locked with the menu access switch (“–”
not displayed). For balances of accuracy class
K
, the menu access switch is
adjusted to lock the “External Calibration” function after verification. To do this, the
switch must be moved to the left. A control seal is affixed to the balance to lock
the menu access switch. Unauthorized attempts to remove this seal will irreversibly
damage it. If you break the seal, the validity of the verification will become void,
and you must have your balance re-verified.
Beep Tone (Acoustic Signal)
If you wish, you can turn off the beep tone (i.e., acoustic signal)
Acoustic signal
Code
On
* 8 2 1
Off
8 2 2
Blocking the Keys
You can block all keys on the balance (except for
e
) by setting the respective code.
Key functions
Code
Accessible
* 8 3 1
Blocked
8 3 2
* = factory setting
2–18
Содержание AC 121S-00MS
Страница 91: ...Sartorius Master Series Product Data Sheets 6 1...
Страница 105: ...Dimensions Scale Drawings AC 211S AC 211P AC 121S 0CE Note All dimensions are given in millimeters 6 24...
Страница 107: ...LC 2201S LC 2201P LC 821 0CE LC 421 GC 1201 G Note All dimensions are given in millimeters 6 26...
Страница 108: ...LC 16000 S LC 34000 P LC 34 0CE Note All dimensions are given in millimeters 6 27...