Installation Instructions
Ambient Conditions
Your Sartorius balance will provide accurate readouts
even when it is exposed to unfavorable conditions.
Please choose a suitable place to set up your balance.
It should not be exposed to the following:
– extreme heat radiation
– drafts
– extreme vibrations
– aggressive chemical atmospheres
The balance may not be used in hazardous
areas/locations where there is danger of explosion.
Do not expose the balance to extreme moisture
over long periods. Moisture in the air can condense
on the surfaces of a cold balance whenever it is
brought to a substantially warmer place. If you transfer
the balance to a warmer area, make sure to
condition it for about 2 hours at room temperature,
leaving it unplugged. Afterwards, if you keep
the balance connected to AC power, the continuous
positive difference in temperature between the
inside of the balance and the outside will practically
rule out the effects of moisture condensation.
You can adapt the balance to your requirements
simply by changing the code settings in the balance
operating menu. For more information, please see
Part 2, “Balance Operating Menu.”
1–7
Содержание AC 121S-00MS
Страница 91: ...Sartorius Master Series Product Data Sheets 6 1...
Страница 105: ...Dimensions Scale Drawings AC 211S AC 211P AC 121S 0CE Note All dimensions are given in millimeters 6 24...
Страница 107: ...LC 2201S LC 2201P LC 821 0CE LC 421 GC 1201 G Note All dimensions are given in millimeters 6 26...
Страница 108: ...LC 16000 S LC 34000 P LC 34 0CE Note All dimensions are given in millimeters 6 27...