Display Modes on Standard Balances
You can select the display mode that best meets your individual requirements.
The factory-set menu code is defined for the highest possible accuracy in the
1st weighing range. The menu code settings for all weighing ranges are listed
on the next page.
Final Readout Mode
If you are interested in the final readout only, you can select this mode by setting
code 2 5 1. A special symbol, “– –,” will be displayed in any weighing range until
the final stable readout is indicated. For the standard readout mode, set code
2 5 2 (all readouts).
Special readout mode “– –”
Code
Special symbol “– –” for unstable readings when load changes
2 5 1
Standard digital readout mode
* 2 5 2
Last Numeral Blanked When the Load Changes
As the load on your balance changes, the display resolution is reduced by a factor
of 10 so that you will obtain a faster and more stable readout.
In the process, the last numeral is blanked until the load stabilizes. Once the load
has stabilized, the readout is indicated again with the full display accuracy, which
means the last numeral is displayed.
Round-Off Function
You can define the level of accuracy by changing the display increments, also
called “scale intervals” (of the last numeral). The display increments possible are
as follows: 1, 2, 5,10, 20, 50, etc.
Starting with the basic increments of a weight unit, the display accuracy can
be reduced by as many as three levels so that you will obtain a faster readout with
a reduced display accuracy. Display accuracy is reduced in relation to the
selected basic increment of the weight unit. Example: weight unit “ct” for carats
(5 increments) with code setting 1 8 3
→
10 increments.
To make this concept easier to understand, the three levels are designated as
“rounding factors” in the tables summarizing the various menu code settings.
IQ-Mode
(Load-Dependent Readability)
In the IQ-mode, weighing is done with a menu-definable, load-dependent
readability throughout the entire weighing range of your balance. In the process,
the display resolution of the last digit of the weight value changes in increments
of 1, 2, 5,10, 20, etc., in proportion to the weight of the sample.
* = factory setting
2–10
Содержание AC 121S-00MS
Страница 91: ...Sartorius Master Series Product Data Sheets 6 1...
Страница 105: ...Dimensions Scale Drawings AC 211S AC 211P AC 121S 0CE Note All dimensions are given in millimeters 6 24...
Страница 107: ...LC 2201S LC 2201P LC 821 0CE LC 421 GC 1201 G Note All dimensions are given in millimeters 6 26...
Страница 108: ...LC 16000 S LC 34000 P LC 34 0CE Note All dimensions are given in millimeters 6 27...