INTERNAL CALIBRATION
Quick-CAL Function Using the
f
Key:
Unload the pan and tare.
Once the display indicates a zero readout, press
the
f
key
(7)
.
“
C
” will now be displayed. The built-in calibration
weight is internally applied by servomotor and
removed at the end of calibration.
If external interference affects the calibration
procedure, you may obtain a brief display of the error
message “
Err 02
.”
In this case, tare the display; then press the
f
key
again once a zero readout is indicated.
An acoustic signal indicates the end of calibration.
Internal Calibration Using the Tare Key:
Calibrate the balance using the tare control if an
application program (such as “tare memory”) is
assigned to the
f
key by menu code in the balance
operating menu (see parts 2 and 4).
Press the tare key
(10)
for at least 2 seconds until “
C–I
”
and “
CAL
” are displayed (next to the
f
key).
Unload the pan and tare.
Once the display indicates a zero readout, press
the
f
key
(7)
.
“
C
” will now be displayed. The built-in calibration
weight is internally applied by servomotor and
removed at the end of calibration.
If external interference affects the calibration
procedure, you may obtain a brief display of the error
message “
Err 02
.”
In this case, tare the display; then press the
f
key
again once a zero readout is indicated.
An acoustic signal will indicate the end of the
calibration process.
Important Note:
!
The weighing pan must be left unloaded when using
the internal calibration function.
1–21
2 sec.
Содержание AC 121S-00MS
Страница 91: ...Sartorius Master Series Product Data Sheets 6 1...
Страница 105: ...Dimensions Scale Drawings AC 211S AC 211P AC 121S 0CE Note All dimensions are given in millimeters 6 24...
Страница 107: ...LC 2201S LC 2201P LC 821 0CE LC 421 GC 1201 G Note All dimensions are given in millimeters 6 26...
Страница 108: ...LC 16000 S LC 34000 P LC 34 0CE Note All dimensions are given in millimeters 6 27...