User manual
VDC-295IDH
_________________________________________________________________________________
- 30 -
Press PTRN to call up a small OSD.
The setting procedure is the same as described above.
3.9 Alarm
NO:
Number of alarm input
PRIO (Priority):
Lower numbers have priority over higher numbers (0-8)
FUN (Function):
Stored function number which is called by the alarm
IN:
NO/NC
– normally open/normally close / OFF - ignore
OUT:
OUT1-OUT4
– Relay output 1,2,3,4 / OFF – no output
HLD (Hold):
The alarm will be held/stopped for a programmed period
of time (03 - 99 sec.)
LATCH:
ON
– Shows all alarms including past alarms.
OFF
– Only shows activated alarms.
DWELL:
Dwell time during multiple alarms (03-99 sec.)
