User manual
VDC-295IDH
_________________________________________________________________________________
- 13 -
2.4 Fail-safe network
When you control the dome by a device other than your own keyboard, errors may occur
in the serial communication. The reason for this is caused by the other device without the
fail-safe network.
In this case, you solve the problem by setting the DIP switch to
“ON” of the dome camera
nearest to the other device.
Fig. 7: Setting the dome camera termination
Fig. 8: Termination diagram (example)
SW2
1
2
ON
Pull up
Pull down
OFF
None
None
