User manual
VDC-295IDH
_________________________________________________________________________________
- 26 -
The position which is marked with *, already has the preset view assigned. To review the
saved preset, press the PRST button at the * position. The camera will show the stored
preset scene.
Press and hold the CTRL button while selecting the desired scene using the joystick. The
current position will be displayed. Release the CTRL button to complete this step.
Alternatively, you may press IRIS OPEN, then CTRL appears. Move to the desired position
and zoom position. Press IRIS CLOSE, and CTRL disappears. Sele
ct “Exit” and press the
joystick to the right. Follow the steps as described above to save the presets.
3.6 Shortcuts for presets
After selecting the view to be stored (camera direction, zoom, focus), press the number (1 to
240) and press CTRL and PRST subsequently. The current view will be stored with the
selected preset number if the preset number has been empty before. If the selected preset
number is not empty, an “OVERWRITE” message will be displayed on the monitor. Select
“OK” and push the joystick to the right to overwrite.
Example:
Pressing 1, 0, 1 + CTRL + PRST will store the current view as preset number 101.
In this case, focus will be programmed as auto, the dwell time will be set to 3 seconds, and
the current AE mode will be programmed.
